Novell NETWARE 6-DOCUMENTATION Manual page 3024

Action:
DSI-X-1007: Error code beginning Directory operation.
Source:
Action:
DSI-X-1008: Could not change the replica type of the partition. Error description
description.
Source:
Explanation:
Action:
Error description getting replica information for partition_name. Unable to make
necessary replica changes during the removal of Directory Services from this server.
Source:
Possible Cause:
Action:
Error allocating memory for server certificate.
Source:
Explanation:
Action:
For information about a specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
DSI.NLM
For information about a specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
DSI.NLM
This condition might exist when Novell Directory Services is being removed
from the server.
For information about a specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).Make sure the server is operating. Wait a few minutes; then retry
the operation. If the problem persists, contact a Novell support provider.
DSI.NLM
Novell Directory Services is being removed from the server.
Note the error code displayed, search the
(http://www.novell.com/documentation/lg/nwec/docui/index.htm), and
follow the recommended suggestions. If the problem persists, contact a Novell
support provider.
DSI.NLM
The server is out of memory.
Increase memory at the server. See
Server Operating System Administration
Error Codes online documentation
Freeing Server Memory Temporarily
Guide.
Error Codes online
Error Codes online
Error Codes online
in the
73
DSI Messages