Novell NETWARE 6-DOCUMENTATION Manual page 2708

UNBIND Driver Parameters
270 Utilities Reference
Parameter
protocol
LAN_driver | board_name
driver_parameter
Driver parameter
[DMA=number]
[FRAME=number]
[INT=number]
[MEM=number]
[PORT=number]
Use to
Specify the name of the protocol you want to
unbind.
Specify the name of the LAN driver or the
network board from which you are unbinding
the protocol.
Specify one or more driver parameters if you
have more than one network board of the same
type in your server. See
Parameters" on page
NOTE:
Enclose driver parameters in square
brackets.
Use to
Specify the DMA channel for the board. Use
the same channel you did when you loaded the
driver.
Specify the frame type for the board. Use the
same frame type you did when you loaded the
driver.
Specify the interrupt for the board. Use the
same interrupt you did when you loaded the
driver.
Specify the memory address for the board. Use
the same memory address you did when you
loaded the driver.
Specify the I/O port for the board. Use the
same I/O port you did when you loaded the
driver.
"UNBIND Driver
270.