Novell NETWARE 6-DOCUMENTATION Manual page 2721

Table 22
Default Option
1. Quit if a VREPAIR Name
Space Support NLM
TM
Not Loaded
2. Write Only Changed
Directory And FAT Entries
Out To Disk
VREPAIR Configuration Options
Alternate Option
Remove Name Space
Support From The Volume
Is
Write All Directory And FAT
Entries Out To Disk
Explanation
These options control whether name space
support for non-DOS files is retained in the
volume tables.
If you add a name space to a volume and
the system doesn't have enough memory,
select Remove Name Space Support From
the Volume. Then select a name space to
delete.
If you remove a name space, the
accompanying extended file information is
destroyed.
For example, if you remove Macintosh
name support, the Macintosh long names,
the finder icons, and the resource forks are
destroyed.
(The DOS name and its data file are kept
and are accessible from DOS
workstations.)
Important: To repair a volume with non-
DOS name space entries, VREPAIR must
find the corresponding name space support
modules. (For example, to repair a volume
with the Macintosh name space, you need
to load V_MAC.NLM; to repair a volume
with the OS/2*, Windows* 95, or Windows
NT* name space, load V_LONG.NLM.)
For more information, see
Traditional Volume.
These options control the changes that are
made to the FATs and Directory tables.
If you repair a mirrored or duplexed volume,
select the alternate option to force an
update of all tables on both hard disks.
Repairing a
Utilities 283