Novell NETWARE 6-DOCUMENTATION Manual page 3310

NWCONFIG-X-73: Two segments with volume name name were found having different
block shift factors (number and number).
Source:
Explanation:
Action:
NWCONFIG-X-74: A resource tag could not be allocated.
Source:
Explanation:
Action:
NWCONFIG-X-75: Error number was returned by the AppendMultiEditText() function.
Source:
Explanation:
Action:
NWCONFIG-X-76: Error number was returned by the MultiEditText function.
Source:
Explanation:
Action:
NWCONFIG-X-77: An invalid parameter was passed to a function at address address.
Source:
Explanation:
Action:
NWCONFIG.NLM
Two volumes with the same name exist, but their block sizes differ.
Bring the disks that contain these volumes online one at a time, rather than at
the same time. If one of the volumes is old and no longer needed, delete it to
avoid the problem in the future. Two volumes on the same server cannot have
the same name.
NWCONFIG.NLM
This error is probably caused by insufficient memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
Freeing Server Memory
Guide.
NWCONFIG Messages 359