Novell NETWARE 6-DOCUMENTATION Manual page 3118

FLAG Messages
FLAG-x-001: Action has been terminated by the operator.
Source:
Possible Cause:
Action:
FLAG-x-225: The mode you specified is reserved.
Source:
Possible Cause:
Action:
FLAG-x-250: The assigned mode was invalid.
Source:
Possible Cause:
Action:
FLAG-x-275: Specify a file before assigning a mode.
Source:
Possible Cause:
Action:
The following includes messages from the FLAG.EXE.
FLAG.EXE
The FLAG was terminated by pressing <Ctrl>+<C>, <Ctrl>+<Break>, or
<Esc>.
No further action is required.
FLAG.EXE
Mode 4 or 6 was entered. These modes are reserved and cannot be used.
Use modes 0, 1, 2, 3, 5, or 7.
FLAG.EXE
The mode that was entered was not in the valid range.
Use modes 0, 1, 2, 3, 5, or 7.
FLAG.EXE
The user specified a valid directory path, not a filename. Directories cannot be
assigned modes.
Specify a filename in the command.
FLAG Messages 167