Novell NETWARE 6-DOCUMENTATION Manual page 2986

CNEAMD Messages
The board did not respond to the initialization command.
Source:
Action:
The board has a bad CheckSum of the ROM.
Source:
Action:
The board's IRQ cannot be found.
Source:
Action:
The board's PORT can not be found.
Source:
Action:
The cable might be disconnected on the board.
Source:
Action:
The following messages include messages from the CNEAMD.LAN.
CNEAMD.NLM
See message "The board did not respond to the initialization command." on
page 771
CNEAMD.NLM
See message "241: The board's ROM has checksum errors." on page 769
CNEAMD.NLM
See message "The board's IRQ cannot be found." on page 772
CNEAMD.NLM
See message "The board's PORT cannot be found." on page 772
CNEAMD.NLM
See message "The cable might be disconnected on the board." on page 772
CNEAMD Messages
35