Novell NETWARE 6-DOCUMENTATION Manual page 3336

NWCONFIG-X-220: The partition table on drive number appears to be invalid. It is
possible that you have not chosen the correct driver. If valid data does exist on this
drive, and you do not want it destroyed, indicate No in the Confirm box that follows
this message.
Warning: If you indicate Yes to recreating the partition table, all existing partitions
(DOS partitions, NetWare partitions, etc.) will be deleted and all existing disk data will
be lost.
Source:
Explanation:
Action:
NWCONFIG-X-221: This disk partition is out of date with respect to other mirror
groups and must be resynchronized before it can be used.
Source:
Explanation:
Action:
NWCONFIG-X-225: This segment exists on disk. Its size cannot be modified unless
you delete and reassign it.
Source:
Explanation:
Action:
NWCONFIG-X-226: The system volume (SYS:) does not exist. Installation cannot be
completed without it.
Source:
Explanation:
Action:
NWCONFIG.NLM
The operating system has determined that the partition table is invalid and
cannot be recovered.
Follow the directions in the warning message. Answering Yes to the
confirmation question will create a new disk partition and destroy all data on
the old partition.
NWCONFIG.NLM
The disk partition cannot be accessed because it is not synchronized.
Resynchronize the disk partition by using F3 in the mirror list.
NWCONFIG.NLM
You are in the Volume Disk Segment List and are trying to edit the size or
name of a segment that is already assigned.
To rename a segment, go to the volume list and edit the volume parameters,
changing the volume name.
NWCONFIG.NLM
System volume SYS: must be mounted before NWCONFIG.NLM can be
used.
Mount the SYS: volume.
NWCONFIG Messages 385