Novell NETWARE 6-DOCUMENTATION Manual page 3524

SERVER-X-2586: Missing message to BROADCAST. Broadcast was NOT sent.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2587: Broadcast was NOT sent.
Source:
Explanation:
Action:
SERVER-X-2588: Invalid station number number.
Source:
Possible Cause:
Action:
SERVER-X-2593: Broadcast was NOT sent to any stations.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2598: Unable to allocate memory for hot plug driver.
Source:
Explanation:
Possible Cause:
Action:
SERVER.EXE
The BROADCAST command was not executed.
No message was specified for the BROADCAST command.
Re-execute the command and include a message.
SERVER.EXE
The BROADCAST message was not sent, possibly because an invalid
connection number was specified.
Re-execute the command and specify a valid connection number.
SERVER.EXE
The BROADCAST command was executed with an invalid station number as
a parameter. The station number was out of range.
Check MONITOR for a list of active station numbers and retry the command.
SERVER.EXE
The message could not be sent to any of the designated stations.
The stations may not have been logged in.
Resend the message when the stations are logged in.
SERVER.EXE
There was not enough memory to load a hot replace disk driver.
The server is very low on memory.
Remove unnecessary modules or add more memory.
SERVER Messages 573