Novell NETWARE 6-DOCUMENTATION Manual page 2729

Table 23
Statistic
Driver Name
Version
Logical Board Number
Board Instance Number
Node Address
Protocols
Network
Total Packets Transmitted
Total Packets Received
Table 28, "Custom Statistics for Token Ring Drivers," on page 303
Table 29, "Custom Statistics for IBM Baseband PCN2L Drivers," on
page 305
NOTE:
Custom statistics vary, depending on the LAN driver installed. For
statistical information about third-party drivers not listed in the custom statistics
section, check the documentation that comes with the driver.
LAN Driver Statistics
Description
The driver name and parameters that correspond to the hardware
settings on the network board.
The current version of the driver.
The number which uniquely identifies each time a driver is
registered with the system.
The number assigned to each physical adapter for which the
driver has been loaded..
The station or node address of the network board in the NetWare
server.
The communication protocols bound to the driver with BIND.
The network number assigned to the cabling system the LAN
driver is operating on. Appears only if the IPX
been bound to the board.
The number of packets sent from the NetWare server through this
LAN driver since the driver was loaded.
(By comparing this figure with the figures for other LAN drivers,
you can see which driver is handling the most traffic.)
This value is maintained by the TSM module.
The number of packets received by the NetWare server sincethe
driver was loaded. This includes file service requests, packets
routed to another network, and packets sent to other IPX sockets
in the NetWare server.
This value is maintained by the TSM module.
TM protocol has
LAN Driver Statistics 291