Novell NETWARE 6-DOCUMENTATION Manual page 3037

DSREPAIR-x-031: Could not truncate the file: filename
Source:
Explanation:
Possible Cause:
Possible Cause:
Action:
DSREPAIR-x-032: Internal API version mismatch, DSREPAIR is version number and
DS is version number.
Source:
Explanation:
Action:
DSREPAIR-x-033: Could not create or open file: name.
Source:
Explanation:
Possible Cause:
Action:
Possible Cause:
Action:
86
System Messages
DSREPAIR.NLM
DSREPAIR could not write a record to the eDirectory database.
The volume could be full.
The database could be corrupted.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume, then try again. If the problem persists, contact
a Novell support provider.
DSREPAIR.NLM
The same release of DS and DSREPAIR is needed to run DSREPAIR.
Check the versions of each utility. To do this, do the following:
To check the version numbers of utilities and NDIR, type the VER.
To check the version of the DSREPAIR.NLM, type NDIR
DSREPAIR.NLM /VER.
To check the DS.NLM version, type MODULES at the server console.
Load a newer version of one or both files. If you are not sure about the current
version, contact a Novell support provider.
DSREPAIR.NLM
DSREPAIR could not create and open a file.
The volume might be full.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume then running DSREPAIR again.
No more directory entries are available on the volume.
Use FILER to make sure you have available directory entries.