Novell NETWARE 6-DOCUMENTATION Manual page 3520

SERVER-X-2206: FreeMovableCacheMemory found an invalid memory list.
Source:
Explanation:
Action:
SERVER-X-2207: Insufficient memory to set up first load search path entry.
Source:
Explanation:
SERVER-X-2212: Unable to create address space with default name.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2214: Unable to create address space name.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2213, 2241, 2301: Unable to load USERLIB.NLM for memory protected
execution.
Source:
Explanation:
Possible Cause:
Action:
SERVER.EXE
Memory might be corrupted.
Replace memory or contact your support provider.
SERVER.EXE
See message "SERVER-X-872: Insufficient memory to set up first load search
path entry." on page
SERVER.EXE
The server could not create the address space.
There may not be enough memory to create the space.
Determine how much memory is available. If memory is low, unload
unnecessary modules or add more memory.
SERVER.EXE
The server could not create the address space.
There might not be enough memory to create the space or the address space
name might be invalid.
Check the address space name to see if it is too long or uses invalid characters.
If the name is valid, determine whether the server is low on memory. If
memory is low, unload unnecessary modules or add more memory.
SERVER.EXE
The USERLIB module could not be loaded. The console probably displays a
message providing more information.
The module might be missing or there might be problems initializing the
module.
Refer to the console messages for more information.
545.
SERVER Messages 569