Novell NETWARE 6-DOCUMENTATION Manual page 3357

NWCONFIG-X-340: There are users logged into this server. Remove all user
connections and try to install Novell eDirectory again.
Source:
Explanation:
Action:
NWCONFIG-X-341: A console command (command) did not finish executing in the
time allowed (number seconds). Control will be switched to the system console
screen, where you must finish it manually.
Source:
Explanation:
Action:
NWCONFIG-X-342: To see a list of existing objects in Novell eDirectory (countries,
organizations, divisions, etc.) when you press Enter, you must first authenticate to
eDirectory. To authenticate, you must (1) enter the administrator name, and (2) enter
the correct password. (Note that if you type the country and company or organization
name, a default administrator name will be created for you.)
Source:
Action:
NWCONFIG-X-343: NWCONFIG cannot lock the root directory entry for volume name.
Some other process is modifying it.
Source:
Explanation:
Action:
NWCONFIG-X-345: The program was unable to initialize NWSNUT.NLM.
Source:
Explanation:
406 System Messages
NWCONFIG.NLM
You cannot install Novell eDirectory while users are logged in to the server.
Clear the users' connections and retry the operation.
NWCONFIG.NLM
The reason the command did not completely execute will be shown on the
system console screen.
After correcting the problem, finish the command on the system console
screen; then return to NWCONFIG.
NWCONFIG.NLM
To see the list, follow the instructions in the message.
NWCONFIG.NLM
Only one process at a time can modify the root directory entry.
Wait until the other process finishes. If it takes more than a couple of hours,
contact a Novell support provider.
NWCONFIG.NLM
The support NLM, NWSNUT, returned an error from the initialization
process. This could be an internal error, or it could be caused by insufficient
memory.