Novell NETWARE 6-DOCUMENTATION Manual page 3051

FILESYS-X-168: Compression: Invalid length or offset.
Source:
Possible Cause:
Action:
FILESYS-X-170: Error writing to the extended directory space.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-171: Error writing to file (filename not accessible) data stream number.
Write was requested by the SERVER.
Source:
Explanation:
Possible Cause:
Action:
100 System Messages
FILESYS.NLM
An I/O error has occurred during file compression. The disk drive or disk
hardware might be starting to malfunction. The file that was being compressed
will remain uncompressed and the system will try again later to compress it.
See Disk Errors in the
FILESYS.NLM
The operating system was trying to write extended directory information to
disk. When it tried to write the information, it got a disk error. The information
was not written to the disk and will be lost. The information which was lost
might have been extended attribute data.
This error might have been caused by a hard disk or channel failure. The disk
might have other data integrity problems.
Use the warning message that preceded this message to determine the actual
cause and solution of the problem. See
System Administration
FILESYS.NLM
A write error has prevented the operating system from correctly writing file
data to the disk. Hot Fix was not able to redirect the data to a new block. The
data stream number indicates the name space stream (0=DOS or Macintosh
data fork, 1=Macintosh resource fork). The data was not written to disk and
will be lost.
A hard disk or channel failure occurred. The disk could have other data
integrity problems.
See Disk Errors in the
Server Operating System Administration
Disk Errors
Guide.
Server Operating System Administration
Guide.
in the Server Operating
Guide.