Novell NETWARE 6-DOCUMENTATION Manual page 3185

Action:
LOGIN-X-370: The specified search drive does not exist.
Source:
Explanation:
Action:
LOGIN-X-380: The line is too long.
Source:
Possible Cause:
Action:
LOGIN-X-400: A network drive cannot be mapped to a drive that is designated as a
local drive.
Source:
Possible Cause:
Action:
LOGIN-X-410: The supervisor has disabled the login function for this server.
Source:
Explanation:
234 System Messages
......
ENDIF
ENDIF
ENDIF
ENDIF
Where possible, take the IF statements out of the nested format and placing
them after the sequence of nested IF statements.
LOGIN.EXE
When the login script uses a SET COMSPEC= or COMSPEC= command and
a network drive is specified, LOGIN ensures that the specified drive is a
search drive and can be used for the COMSPEC command.
Before issuing the SET COMSPEC or COMSPEC command, do one of the
following steps:
Set the COMSPEC to a local (nonnetwork) search drive.
Map a search drive to the path where the command processor is located.
LOGIN.EXE
A line in the login script exceeded the maximum limit of 254 bytes.
Shorten the line or split the command into two commands so that they have
the same functionality but occur on two lines.
LOGIN.EXE
The user tried to map a local drive to volume or directory on the network.
Map the volume or directory from the network to a network drive.
LOGIN.EXE
This account is locked.