Novell NETWARE 6-DOCUMENTATION Manual page 3191

LOGIN-X-665: The EXIT command followed by a string is not supported on this
machine.
Source:
Possible Cause:
Action:
LOGIN-X-670: The variable MACHINE NAME is not supported on this platform.
Source:
Explanation:
Action:
LOGIN-X-680: This platform does not support search drives.
Source:
Explanation:
Action:
LOGIN-X-690: Insufficient memory is available to add the variable to the path
environment in mapping: [mapping]
Source:
Explanation:
Action:
LOGIN-X-700: The specified path is invalid.
Source:
Explanation:
Action:
240 System Messages
LOGIN.EXE
The EXIT command was followed by a text string in the user's login script.
Remove the text string that follows the EXIT command in the user's login
script.
LOGIN.EXE
The login script contains a MACHINE_NAME variable. MACHINE_NAME
is not supported on this platform, only in DOS.
Do not use the MACHINE_NAME command in the login script when using
this platform.
LOGIN.EXE
The login script contains search-drive mappings.
Do not specify search-drive mappings in the login script when using this
platform.
LOGIN.EXE
There is not enough room in the master environment.
Increase the size of the master environment. In the CONFIG.SYS file, include
the command SHELL=directory of command.com /e:size of master
environment. For example:
SHELL=C:\COMMAND.COM /E:1024
LOGIN.EXE
When using the DISPLAY or FDISPLAY command in the login script, the
specified file or path was invalid.
Make sure that the path name is a path. If necessary, correct the path in the
login script.