Novell NETWARE 6-DOCUMENTATION Manual page 3475

SBCON-X-201: No device is reserved.
Source:
Possible Cause:
Action:
SBCON-X-202: The device cannot be reserved.
Source:
Possible Cause:
Action:
SBCON-X-203: The list device is not finished.
Source:
Possible Cause:
Action:
SBCON-X-204: The device name format is invalid.
Source:
Possible Cause:
Action:
SBCON-X-205: The input parameters are wrong.
Source:
Possible Cause:
Action:
524 System Messages
SBCON.NLM
None of the devices is available for use.
Free a device and retry the operation. If the problem persists, contact a Novell
support provider.
SBCON.NLM
The device is in use by another application.
Check if you have opened the device on the client interface or if another job
is running. Retry the operation. If the problem persists, contact a Novell
support provider.
SBCON.NLM
You tried to access the device when the list device command was used
at the server console.
Wait for the list device command to complete, then retry the operation.
SBCON.NLM
The device name is not in the format, device.media.
Make sure the name of the device is in the correct format (device name.media
name).
SBCON.NLM
You were restoring files that could not be backed up because they were open.
None required.