Novell NETWARE 6-DOCUMENTATION Manual page 2657

Parameter
Auto Clear Interrupt Statistics = value Specify whether interrupt statistics are removed from memory at
NCP Parameters
Use to
the time a processor is taken offline or an interrupt handler (ISR)
is removed.
Supported values: ON, OFF
Default: ON
To retain per-processor interrupt handler statistics for offline
processors or to retain the total interrupt contribution from a
previously loaded handler (ISR), set the parameter to OFF.
This parameter is preferably set in the STARTUP.NCF file.
With NetWare Core Protocol
Control NCP packets
Control boundary checking
Assign the NCP Server Packet Signature levels
For a description of NCP parameters, see
(NCP ) parameters, you can
TM TM
Table 13 on page 220.
Utilities 219