Novell NETWARE 6-DOCUMENTATION Manual page 3501

SERVER-X-1134: Invalid load file format.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-1136: Invalid load file version.
Source:
Explanation:
Action:
SERVER-X-1143: Unable to unload module name (error number).
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-1152: Node number is invalid and was ignored.
Source:
Explanation:
Action:
550 System Messages
SERVER.EXE
The description text field of an NLM was invalid. This field should contain
text (about the NLM) that is greater than zero and less than 128 characters
long.
The NLM in this case did not meet these criteria. This problem is due to
manufacturer error, NLM corruption, or disk malfunction.
Reload the NLM from the master CD-ROM or diskette. If the error persists,
make sure the disk drive is operating properly. If the drive functions correctly,
contact the vendor of the NLM for updates or fixes.
SERVER.EXE
The version number of the file to be loaded is incorrect.
Specify the name of a valid NetWare loadable file (probably an NLM), or find
out if the file has been corrupted. If the file is corrupted, get a new copy of the
file.
SERVER.EXE
The NLM could not be unloaded.
The module might have public symbols that other loaded NLM programs use,
or other loaded NLM programs are dependent upon this module to be loaded.
Check the documentation for the NLM. The documentation should specify
which module or types of modules would be using it. These modules must be
unloaded before the server can unload the module that produced the error
message.
SERVER.EXE
When you loaded a LAN driver, you specified an invalid node number as a
parameter. The server ignored the invalid node number and selected a node
number that appeared to be valid.
This message is for information only.