Novell NETWARE 6-DOCUMENTATION Manual page 3333

NWCONFIG-X-198: The definition for sync (or instance) number of volume name was
removed.
Source:
Explanation:
Action:
NWCONFIG-X-199: Volume name sync (or instance) number was not found in the
volume's sync list.
Source:
Explanation:
Action:
NWCONFIG-X-200: Name change update for volume old_name to new_name is being
completed.
Source:
Explanation:
Action:
NWCONFIG-X-207: The name name is reserved and cannot be used for a volume.
Source:
Explanation:
Action:
NWCONFIG-X-208: The volume definition table on name has invalid entries. Check to
be sure all disk drivers are loaded and configured properly.
Source:
Explanation:
Action:
382 System Messages
NWCONFIG.NLM
Multiple volumes with the same name were found. One of them was discarded
from memory. The data is still intact on disk.
Because each volume on a given server must have a unique name, take one of
the physical disks offline. You might have to delete one of the volumes and
then bring the disks online simultaneously.
NWCONFIG.NLM
An internal system error has occurred.
Contact a Novell support provider.
NWCONFIG.NLM
The volume name has been changed.
None. This message is for information only.
NWCONFIG.NLM
A volume name was entered that is reserved and cannot be used. The names
currently reserved are PIPE and CON.
Choose a different name.
NWCONFIG.NLM
The data on the disk is corrupted or unreadable.
A confirmation question will follow this message. Choosing to fix the volume
definition table will destroy the invalid entries. If you think that valid data
exists on the volumes in question, do not fix the table. See
Server Operating System Administration
Disk Errors
Guide.
in the