Novell NETWARE 6-DOCUMENTATION Manual page 3177

Table of Contents

Advertisement

Error writing to XINITLD.NCF file on DOS partition. Installation cannot proceed.
Source:
Possible Cause:
Action:
The country/codepage pair specified is not valid. Country = number, Code Page =
number.
Source:
Possible Cause:
Action:
The NetWare server in the directory specified is not version 3.1x or 4.1x. The server
cannot be upgraded.
Source:
Possible Cause:
Action:
Unable to allocate sufficient memory to proceed.
Source:
Possible Cause:
Action:
Unable to copy installation scripts. Installation cannot continue.
Source:
Possible Cause:
Action:
Possible Cause:
Action:
226 System Messages
LOCALSEL.NLM
The disk is full or inaccessible.
Verify that the target drive is still accessible, is not full, and can be written to.
LOCALSEL.NLM
You specified a code page that does not correspond with the selected country.
Choose a valid code page for the selected country.
LOCALSEL.NLM
The server operating system you want to upgrade is not NetWare 3.10, 3.11,
or 3.12, NetWare 4.10 or 4.11, or NetWare 5x.
Upgrade your server operating system to NetWare 3.1x or 4.1x. Then run the
installation software again to upgrade to NetWare 6.
LOCALSEL.NLM
The server does not have enough memory.
Exit the installation, install more memory in the server, and run the installation
software again. The minimum recommended RAM for a NetWare 6 server is
128 MB.
LOCALSEL.NLM
The destination drive does not have enough disk space.
Make sure that the destination drive has enough disk space and that you can
write files to the drive.
The installation software is unable to access the CD-ROM.
Make sure the CD-ROM drive is functional.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWARE 6-DOCUMENTATION and is the answer not in the manual?

This manual is also suitable for:

Netware 6

Table of Contents