Novell NETWARE 6-DOCUMENTATION Manual page 3197

LOGIN-X-890: The specified server is unknown.
Source:
Possible Cause:
Action:
LOGIN-X-895: The user does not exist in the specified context.
Source:
Possible Cause:
Action:
LOGIN-X-903: The command line syntax is invalid.
Source:
Possible Cause:
Action:
LOGIN-X-905: This utility was unable to initialize the country information.
Source:
Possible Cause:
Possible Cause:
Action:
LOGIN-X-915: The specified volume does not exist.
Source:
Action:
246 System Messages
LOGIN.EXE
The user mistyped the name of the server, specified a server that is not on the
network, or specified a server that has been brought down for system
maintenance.
Use NLIST or NETADMIN to list the servers that the station recognizes. Type
the name of the server correctly. If the server has been brought down for
maintenance, try the command after the server has been brought back up.
LOGIN.EXE
The user specified in the command line does not exist.
Specify a valid username in the command line.
LOGIN.EXE
The LOGIN command type is not correct.
Type LOGIN /? for help.
LOGIN.EXE
The shell or VLM failed to load.
Some of the memory is corrupted.
See message "905: This utility was unable to initialize the country
information." on page 775
LOGIN.EXE
See message "915: The specified volume does not exist." on page 778