Novell NETWARE 6-DOCUMENTATION Manual page 2950

To
Load one module into a
protected space with a
user-defined name
Use this command
when you want to
create your own
name for the space.
Also use this
command when you
want to load more
than one module into
the same protected
space.
Repeat the command
for each module you
want to load into the
space.
You can also include
the restart option on
the same command
line.
38
Server Memory Administration Guide
Enter this command at the
System Console prompt
[LOAD] ADDRESS
SPACE = space_name
module_name
Do this on the Address
Space Information Page of
NetWare Remote Manager
1. Type ADDRESS
SPACE = space
_name module_
name in the Load
Module Protected
field.
2. (Optional) If you
want to view the
System Console
screen when the
module loads,
check the Display
System Console
for Module Load
check box.
3. Click the Load
Module Protected
button.
4. (Optional) If you
want to load more
than one module
in the same
space, repeat
Steps 1 through 3
for each module
you want to load.
Example
[LOAD] ADDRESS
SPACE = DB_SPACE
DATABASE.NLM
Creates a new address
space called
DB_SPACE and loads
DATABASE.NLM into it.
[LOAD]
ADDRESS_SPACE =
DB_SPACE RESTART
TEST.NLM
Loads TEST.NLM into
the DB_SPACE address
space and also adds
restart functionality to
the address space.
[LOAD] ADDRESS
SPACE = DB_SPACE
TEST.NLM
Loads the TEST.NLM in
to the same DB_SPACE
address space that the
DATABASE.NLM was
loaded into.