Novell NETWARE 6-DOCUMENTATION Manual page 3429

PSERVER-X-64: Insufficient memory is available to create the main menu. The print
server console will be disabled.
Source:
Possible Cause:
Action:
PSERVER-X-79: The program cannot create the server status form.
Source:
Possible Cause:
Action:
PSERVER-X-80: The program cannot push the main menu.
Source:
Possible Cause:
Action:
PSERVER-X-81: Insufficient memory is available to build a NetWare server list.
Source:
Possible Cause:
Action:
PSERVER-X-88: The program cannot get the object ID for the print server.
Source:
Possible Cause:
Action:
478 System Messages
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
eDirectory, which must be opened to get object IDs, is locked or corrupted.
eDirectory is usually locked only momentarily.
Try printing again in a few minutes. If the error persists, run DSREPAIR.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.