Novell NETWARE 6-DOCUMENTATION Manual page 3359

NWCONFIG-X-350: The total space required by files that will be copied (number MB;
number bytes) is larger than the free space available on the system volume (number
MB; number bytes). Because some files may be overwritten and replaced, you may
have sufficient space, but that cannot be determined at this point.
You may want to do one or more of the following: Select fewer file groups (if
applicable), delete files, purge deleted files, or expand the size of system volume
SYS: (by recreating it or adding an additional volume segment).
Source:
Explanation:
Action:
NWCONFIG-X-351: Warning: TIMESYNC.NLM is not currently loaded. You should load
it (from the system console screen) before continuing. Novell eDirectory may have
trouble synchronizing properly if the local time differs from the network time.
Source:
Explanation:
Action:
NWCONFIG-X-352: Warning: Device number contains volume information for
segment number of volume name. If you want to save this device's volume data,
confirm Yes in the box that follows this message. If you indicate No, the volume data
(on this device only) will be destroyed.
Source:
Explanation:
Action:
NWCONFIG-X-354: An attempt to create a record for product name in the product
database failed. Error: code.
Source:
Explanation:
408 System Messages
NWCONFIG.NLM
If you are replacing files with this copy operation (that is, if the files you are
copying already exist on the server), then you might have enough space.
If sufficient space is available, continue with the operation; otherwise, follow
the instructions in the message.
NWCONFIG.NLM
Novell eDirectory requires that TIMESYNC.NLM be loaded.
Load the TIMESYNC NLM.
NWCONFIG.NLM
NWCONFIG will delete the volume segment from this device if you select
Yes.
Proceed as appropriate for your situation.
NWCONFIG.NLM
The disk space might be full or limited in some fashion so as to prohibit
writing to this file. The file also might be flagged read-only or otherwise made
inaccessible.