Novell NETWARE 6-DOCUMENTATION Manual page 3124

FLAG-x-877: The Compress attribute is supported only with NetWare v4.x
Source:
Explanation:
Action:
FLAG-x-878: You cannot set both the Immediate Compress and Don't Compress
attributes.
Source:
Possible Cause:
Action:
FLAG-x-879: Migration is not enabled on the server.
Source:
Possible Cause:
Action:
FLAG-x-880: Compression is not enabled on the server.
Source:
Possible Cause:
Action:
FLAG-x-901: You are not attached to the specified server.
Source:
Action:
FLAG.EXE
The user tried to set the Immediate Compress or Don't Compress attribute on
a server that is not a NetWare 4 server.
If the server is not a NetWare 4 server, do not use the Immediate Compress or
Don't Compress attribute.
FLAG.EXE
The user tried to set both the Immediate Compress file attribute and the Don't
Compress file attribute. These two file attributes cannot both be set at the same
time.
Decide whether the file should be compressed or not compressed; then use the
appropriate flag.
FLAG.EXE
The user tried to use the Migration capability on a server that is not currently
supporting migration.
Verify the Migration status on the server. If the problem persists, contact a
®
Novell support provider.
FLAG.EXE
The user tried to use the Compression capability on a server that is not
currently supporting compression.
Verify the Compression status on the server. If the problem persists, contact a
Novell support provider.
FLAG.EXE
See message "901: You are not attached to the specified server." on page 775
FLAG Messages 173