Novell NETWARE 6-DOCUMENTATION Manual page 2974

CAPTURE Messages
CAPTURE-X-163: This workstation does not have enough memory to run CAPTURE.
Source:
Possible Cause:
Action:
CAPTURE-X-229: The job configuration contains a form that does not exist.
Source:
Possible Cause:
Action:
CAPTURE-X-906: The Unicode files cannot be found.
Source:
Action:
CAPTURE-X-917: This utility was unable to set the context.
Source:
Action:
The following messages include messages from the CAPTURE.EXE.
CAPTURE.EXE
This workstation does not have enough available memory. This utility requires
a minimum of from 235 KB to 275 KB of memory.
NOTE:
Execution time increases if limited memory is available.
Increase the memory that is available to the workstation. See
Workstation Memory Problems" on page
CAPTURE.EXE
The form specified in the print job configuration might have been deleted.
Modify the print job configuration to specify a form that exists. Or, specify the
form on the command line using the Form= command.
CAPTURE.EXE
See message "906: The Unicode files cannot be found." on page
CAPTURE.EXE
See message "917: This utility was unable to set the context." on page
787.
CAPTURE Messages
"Resolving
776.
778.
23