Novell NETWARE 6-DOCUMENTATION Manual page 3296

NWCONFIG-X-8: An attempt to add a field to a form failed.
Source:
Explanation:
Possible Cause:
Action:
NWCONFIG-X-9: An attempt to write out partition table information failed. Error code:
code.
Source:
Explanation:
Action:
NWCONFIG-X-10: The block allocation size does not match that of another volume
with the same name.
Source:
Explanation:
Action:
NWCONFIG-X-11: The number of segments in the volume does not match the number
in another volume with the same name.
Source:
Explanation:
NWCONFIG.NLM
NWCONFIG was unable to complete an operation to build a screen
presentation.
Memory is insufficient at the server.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
While writing the partition information to the disk drive, the operating system
reported an error from NWCONFIG.
See Disk Errors in the
information on the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
NWCONFIG.NLM
NWCONFIG found two volume segments with the same name, but the block
sizes of the two do not match. Two volumes on the same server cannot have
the same name.
Bring the disks that contain these volumes online one at a time, rather than at
the same time. If one of the volumes is old and no longer needed, delete it to
avoid the problem in the future.
NWCONFIG.NLM
NWCONFIG found two volumes with the same name, but the number of
segments in the two do not match. Two volumes on the same server cannot
have the same name.
Server Operating System Administration
Freeing Server Memory
Guide.
Guide. For
Error Codes online
NWCONFIG Messages 345