Novell NETWARE 6-DOCUMENTATION Manual page 3540

SMDR Messages
SMDR-X-1: An internal error has occurred. An external SMDR requested a connection
that cannot be opened.
Source:
Possible Cause:
Action:
SMDR-X-2: An internal error has occurred. The SMDR was unable to provide a thread
to service the connection.
Source:
Explanation:
Action:
SMDR-X-3: An internal error has occurred. The SMDR was unable to broadcast a SAP.
The SMDR will unload.
Source:
Explanation:
Action:
These messages are generated by the Storage Management Data Requester
(SMDR) Module.
SMDR.NLM
An internal error has occurred in the program. The underlying transport was
unable to complete the connection transaction due to a network disruption or
failure in the protocol driver (for example, SPXS.NLM, etc.).
Retry the operation. If the problem persists, contact a Novell support provider.
SMDR.NLM
Normally SMDR creates a thread for a new service process for each
connection. In this case, the server did not have enough memory for this
process.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SMDR.NLM
An internal error has occurred in the program. The Service Advertising
Protocol (SAP) failed.
Try bringing down the server, then rebooting it. Reload the SMDR. If the
problem persists, contact a Novell support provider.
Freeing Server Memory
Guide.
SMDR Messages 589