Novell NETWARE 6-DOCUMENTATION Manual page 3366

NWCONFIG-X-414: This program could not find any NetWare partitions on the new
computer; it did not complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-415: Both computers do not have the same number of NetWare
partitions. This program did not complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-416: The new server computer's NetWare partition is orphaned, cloned
or non-operational. This program did not complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-417: The new server computer's NetWare partition is already mirrored.
This program did not complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-418: The new server's NetWare partition contains a volume. This
program did not complete auto mirroring.
Source:
Explanation:
NWCONFIG.NLM
This program is no longer able to see the hard disk.
Verify that the correct disk driver is loaded. Try installing again. If the problem
persists, contact a Novell support provider.
NWCONFIG.NLM
Auto mirroring cannot take place if both computers do not have the same
number of NetWare partitions.
Manually mirror these partitions. Select the Manual option instead of the
Automatic option.
NWCONFIG.NLM
There is a problem reading the new server's NetWare partition.
Verify that the correct disk driver is loaded. Select the Manual partition option
and resynchronize the mirrored group.
NWCONFIG.NLM
The program thinks that the new server's NetWare partition is already
mirrored.
The mirror group should be deleted, re-created and mirrored.
NWCONFIG.NLM
A partition with a volume cannot be mirrored.
NWCONFIG Messages 415