Novell NETWARE 6-DOCUMENTATION Manual page 3247

NDPSM-X-350: The NDPS Manager does not support autoloading of port handlers on
SFT III servers. This must be done from the system console.
Source:
Action:
NDPSM-X-351: Error <code> occurred while creating the portal.
Source:
Possible Cause:
Action:
NDPSM-X-358: Error <code> occurred while saving a backup of the NDPS Manager
database files.
Source:
Possible Cause:
Action:
NDPSM-X-366: The NDPS Manager is unable to automatically back up its database.
Source:
Possible Cause:
Action:
296 System Messages
NDPSM.NLM
SFT III is not supported by NDPS.
NDPSM.NLM
The server is out of memory.
Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see
Temporarily in the Server Operating System Administration
information about the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM.NLM
A file I/O error has probably occurred.
For information about the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM.NLM
The server is out of memory.
Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see
Temporarily in the Server Operating System Administration
Freeing Server Memory
Guide. For
Error Codes online
Error Codes online
Freeing Server Memory
Guide.