Novell NETWARE 6-DOCUMENTATION Manual page 3381

NWCONFIG-X-503: The installation NLM failed to set the correct creation date and
time of the language configuration file LCONFIG.SYS.
Source:
Action:
NWCONFIG-X-504: Bindery files have been upgraded previously on this server. In the
screen that follows, you may elect to re-upgrade if you desire.
Upgrading the bindery again is not advisable (although occasionally it may be
necessary) because an additional upgrade might invalidate trustee rights on files for
this server's volumes.
Source:
Action:
NWCONFIG-X-516: The first octet of the IP address determines the type of network.
In Class A networks, the first octet can only contain numbers in the range range. In
Class B networks, the first octet contains the numbers in the range range. In Class C
networks, the first octet contains the numbers in the range range.
Source:
Explanation:
Action:
NWCONFIG-X-518: The IP address field should first be initialized before initializing
the mask field.
Source:
Explanation:
Action:
NWCONFIG-X-523: NWCONFIG.NLM could not load name.NLM, possibly because the
NLM was not located in the search directory.
Source:
Explanation:
Action:
430 System Messages
NWCONFIG.NLM
None. This message is for information only.
NWCONFIG.NLM
Follow the suggestions in the message.
NWCONFIG.NLM
The subnet mask was not set or was not set correctly.
Set the subnet mask using the appropriate values for the network class.
NWCONFIG.NLM
You tried to set the mask before specifying the IP address.
Specify the IP address first, then the mask.
NWCONFIG.NLM
The NLM could not be found.
Make sure the NLM is installed and a search path points to the NLM's
location.