Novell NETWARE 6-DOCUMENTATION Manual page 3206

LOGOUT-X-220: You are not attached to server name.
Source:
Explanation:
Action:
LOGOUT-X-222: You are not logged in to a Directory Services tree.
Source:
Possible Cause:
Action:
LOGOUT-X-230: Default drive cannot be remapped to drive drive.
Source:
Explanation:
Possible Cause:
Action:
LOGOUT-X-295: This utility could not create a context.
Source:
Explanation:
Action:
LOGOUT.EXE
The user tried to log out of a server that the workstation was not attached to.
Make sure to type the server name correctly.
LOGOUT.EXE
The /TR option was used in a LOGOUT command when the user was not
logged in to a Directory tree.
Do not use the /TR option in a LOGOUT command.
LOGOUT.EXE
LOGOUT thought a certain drive was valid, and DOS could not set the default
drive to that letter.
When LOGOUT logs the user out of the default server, it leaves the user
attached, but not logged in to the server. LOGOUT tries to leave the user
mapped to a valid network or local drive. LOGOUT tries to find the first valid
drive. If a valid drive is not found, the error message No valid drives are
available to assign default to. is returned. If a valid drive is found, LOGOUT
calls DOS to set the default drive to that drive letter. If DOS cannot locate the
drive that LOGOUT thought was valid, or cannot set the drive to the proper
letter, this message will be returned to the workstation.
Try issuing the MAP command to see if any drives are available; then change
to that drive with the drive letter: command. If these attempts fail and the user
cannot find the LOGIN.EXE or MAP.EXE program, reboot and allow the
shell to connect the workstation to a server that contains LOGIN.EXE or
MAP.EXE.
LOGOUT.EXE
The workstation does not have enough memory to set up the context.
Increase the memory available to the workstation. See
Workstation Memory Problems" on page
"Resolving
787.
LOGOUT Messages 255