Novell NETWARE 6-DOCUMENTATION Manual page 2669

Parameter
Time Zone = time_zone_string
Default Time Server Type =
type_of_time_source
Start of Daylight Savings Time =
date_and_time
End of Daylight Savings Time =
date_and_time
Use to
Specifies the time zone string, which indicates:
The abbreviated time zone name
The offset from Coordinated Universal Time (UTC)
The alternate abbreviated time zone name to be used when
daylight saving time is in effect
Maximum: 80 characters
Default: No Time Zone
This parameter causes UTC time to be recalculated from local
time.
You can set this parameter in the STARTUPCF file.
Specify the default time synchronization server type. This
parameter can be overridden by other time synchronization
parameters.
Supported types: Reference, primary, secondary, single
reference.
Supported types: Reference, primary, secondary, single
reference
Default: Secondary
You can set this parameter in the STARTUPCF file.
Specify the local date and time when the change to daylight
saving time should occur.
Maximum: 79 characters
IMPORTANT:
You must set both the start and end of daylight
saving time before either date is actually scheduled.
Specify the local date and time when the change from daylight
saving time should occur.
Maximum: 79 characters.
IMPORTANT:
You must set both the start and the end of daylight
saving time before either date is actually scheduled.
Utilities 231