Novell NETWARE 6-DOCUMENTATION Manual page 2996

DSDIAGNOSTICS Messages
DSDiag-x-001: Process data not found. Exiting process.
Source:
Explanation:
Possible Cause:
Action:
DSDiag-x-002: Insufficient memory error.
Source:
Possible Cause:
Action:
Action:
DSDiag-x-003: Could not create initial context.
Source:
Explanation:
Action:
The following messages include messages from the DSDIAG.NLM.
DSDIAG.NLM
The report process could not locate its data to initialize the report.
This is an unexpected error.
Unload DSDIAGNOSTICS and then reload it. If the error persists, contact a
®
Novell support provider.
DSDIAG.NLM
This server does not have enough memory to create a report.
Exit all of the reports that are running except for the current report. Let the
current report run to completion and try again.
Increase memory available to the server. See
Temporarily in the Server Operating System Administration
DSDIAG.NLM
An error occurred in the load process. This is an unexpected error.
Check for possible configuration errors and reboot. If this error occurs
repeatedly, contact a Novell support provider.
Freeing Server Memory
DSDIAGNOSTICS Messages
Guide.
45