Novell NETWARE 6-DOCUMENTATION Manual page 2693

Additional Information
START PROCESSORS
Purpose
Syntax
To create multiple configuration files, copy the IPXSPX.CFG file to a
new filename (IPXSPX2.CFG, for example). Then you can change the
IPXSPX.CFG file (by using INETCFG) and still preserve the original
configuration in the IPXSPX2.CFG file.
To load a configuration file other than the default IPXSPX.CFG file, use
the LDFILE option.
For example, if you have a second configuration file called
IPXSPX2.CFG, you can load that configuration by typing
[LOAD] SPXS LDFILE = IPXSPX2
When you load SPXS, STREAMS is autoloaded.
Topic
Setting SPX parameters
using SPXCONFG
Setting SPX parameters
using INETCFG
Use START PROCESSORS at the server console prompt to start one or more
secondary processors when the NetWare
multiprocessor computer.
NOTE:
Because NetWare is running on processor 0, the boot processor, START
PROCESSORS affects only secondary processors.
START PROCESSORS [n...]
Parameter
(no parameters)
See
"SPXCONFG" on page 252
"INETCFG" on page 69
®
6 server is running on a
Use to
Start all secondary processors.
Utilities 255