Novell NETWARE 6-DOCUMENTATION Manual page 3154

IDEHD.CDM Messages
IDEHD.CDM–001: Warning! The driver did not bind to device_name because it does
not support this device. Contact the manufacturer for a full-function driver.
Source:
Possible Cause:
Action:
IDEHD.CDM–002: The driver did not bind to device_name because it could not
determine the appropriate drive geometry
Source:
Possible Cause:
Action:
The following includes messages from the IDEHD.CDM.
IDEHD.CDM
The driver recognizes this device as a known device that it cannot support, not
even generically.
Contact the device manufacturer to obtain the appropriate driver.
IDEHD.CDM
The device is not returning necessary information about its geometry. The
device probably does not conform to the standards required of devices that run
with NetWare.
Contact the device manufacturer.
IDEHD.CDM Messages 203