Novell NETWARE 6-DOCUMENTATION Manual page 3567

SMSDI-X-287: No more connections available for Alert Routines.
Source:
Possible Cause:
Action:
SMSDI-X-288: No memory is available for any size block.
Source:
Possible Cause:
Action:
SMSDI-X-289: The application has requested an operation that requires READ access
mode, but this has not been granted.
Source:
Possible Cause:
Action:
SMSDI-X-290: A call was made to ReadSessionData but the media is at the end of the
session [including session and media index].
Source:
Possible Cause:
Action:
SMSDI-X-291: The application has requested an operation that requires WRITE
access mode, but this has not been granted.
Source:
Possible Cause:
Action:
616 System Messages
SMSDI.NLM
An internal error occurred in the program that Enhanced SBACKUP was
unable to handle.
Try again. If the problem persists, contact a Novell support provider.
SMSDI.NLM
The server does not have enough available memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SMSDI.NLM
In NetWare 6, this message will appear only if an internal error has occurred.
Try again. If the problem persists, contact a Novell support provider.
SMSDI.NLM
An internal error has occurred in the program.
Try again. If the problem persists, contact a Novell support provider.
SMSDI.NLM
In NetWare 6, this message will appear only if an internal error has occurred
in the program.
Try again. If the problem persists, contact a Novell support provider.
Freeing Server Memory
Guide.