Novell NETWARE 6-DOCUMENTATION Manual page 3639

TIMESYNC-X-65: Couldn't create main process.
Source:
Possible Cause:
Action:
TIMESYNC-X-72: Time synchronization has been lost after number successful polling
loops.
Source:
Explanation:
Action:
TIMESYNC-X-73: Unrecognized command line parameter: parameter.
Source:
Explanation:
Action:
TIMESYNC-X-77: Unrecognized parameter in configuration file: string.
Source:
Explanation:
Action:
688 System Messages
TIMESYNC.NLM
The server does not have enough memory available.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
TIMESYNC.NLM
Time synchronization was lost for some unexplained reason. This is normally
not a problem and the system will reestablish synchronization. However, if the
problem occurs frequently, the system may have a hardware or network
problem.
Try the following:
Check for recent time changes or configuration changes that may have
caused this problem.
Check the Synchronization Radius parameter and make sure it is not
unreasonably small. A practical limit is 1000 milliseconds (1 second).
The system might be experiencing a hardware or network problem. See
Troubleshooting in the online documentation.
TIMESYNC.NLM
The user entered an invalid parameter in the command line.
Try again using the correct syntax.
TIMESYNC.NLM
The user entered an invalid parameter in the TIMESYNC.CFG file.
Try again using the correct syntax.
Freeing Server Memory
Guide.