Novell NETWARE 6-DOCUMENTATION Manual page 3175

Lib0-X-003: RegisterTrackedResource() for BSD Sockets failed, rc=number. An
internal system error has occurred. There may not be enough server memory, or
server memory may be corrupted.
Source:
Explanation:
Action:
Lib0-X-004: Unable to register console command (name).
Source:
Explanation:
Action:
Lib0-X-081: Lib0 failed to allocate the internal memory resource tag for the Berkeley
Sockets Mutexes. There may not be enough server memory, or server memory may
be corrupted.
Source:
Explanation:
Action:
Lib0-X-082: Lib0 failed to initialize the Berkeley Socket mutexes. An internal system
error has occurred.
Source:
Explanation:
Action:
224 System Messages
LIB0.NLM
A call to RegisterTrackedResource() failed. The LIB0.NLM program cannot
load at this time due to memory constraints.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
LIB0.NLM
Lib0 could not register a console command with the server operating system,
probably because memory is low. If memory is adequate, there might be a
problem with the operating system.
Check server memory. If necessary, increase the memory available to the
server. (See Freeing Server Memory Temporarily
System Administration
Authorized Reseller or Novell Technical Support.
LIB0.NLM
System resources are so low that the library could not provide the needed
memory resource tag.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
LIB0.NLM
System resources are so low that the library could not provide the needed
memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Guide.) If memory is adequate, contact a Novell
Freeing Server Memory
Guide.
in the Server Operating
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.