Novell NETWARE 6-DOCUMENTATION Manual page 3133

Failed to generate an ObjectKeyPair
Source:
Possible Cause:
Action:
Failed to open configuration file
Source:
Possible Cause:
Action:
Unable to find default configuration file
Source:
Possible Cause:
Action:
Unable to locate Anonymous user in default context
Source:
Possible Cause:
Action:
USAGE : nwftpd [-c <Config File>] [-a]
Source:
Possible Cause:
Action:
Could not create the .cfg file.
Source:
Possible Cause:
Action:
182 System Messages
NWFTPD.NLM
The user entered has insufficient rights.
Ensure that the user has sufficient rights.
NWFTPD.NLM
The configuration file is not available at specified location.
Verify if the configuration file is available at the specified location.
NWFTPD.NLM
Configuration file is not available at default location (SYS:/ETC).
Verify if the configuration file is availabl at the default location.
NWFTPD.NLM
Anonymous use does not exist at the FTP Server's context
Run nwftpd -a to create anonymous user and reload NWFTPD.NLM.
NWFTPD.NLM
The user might have tried to load NWFTPD.NLM with wrong usage.
Load NWFTPD.NLM by typing only the NLM name for default configuration
file, or ftpupgrd [-c config_file] for specific configuration file
name or nwftpd [-a] for creating anonymous user.
FTPUPGRD.NLM
Configuration file does not exist for ftp server upgrade, or existing
configuration file has read only access.
Modify the file access if it is read only or specify proper configuration file
name with ftpupgrd [-c config_file] usage.