Novell NETWARE 6-DOCUMENTATION Manual page 3356

NWCONFIG-X-334: Enter a new name for object name.
Source:
Explanation:
Action:
NWCONFIG-X-335: An object with name name already exists. Choose a different
name.
Source:
Explanation:
Action:
NWCONFIG-X-336: Driver name could not be loaded because the command line is too
long. Load this driver manually from the system console.
Source:
Explanation:
Action:
NWCONFIG-X-337: Warning: Typically, an organization with one or more servers
should have only one tree. Different trees do not share Novell eDirectory information
(servers, print servers, users, etc.). If there are additional trees you will have to go
through an additional login to communicate with other trees (via bindery services).
Make sure you have read the documentation and understand the complexities of
managing a multi-tree internetwork. If you decide that you do want another tree,
confirm Yes in the box that follows this message.
Source:
Action:
NWCONFIG-X-339: You must upgrade the bindery before volumes may be installed in
Novell eDirectory.
Source:
Action:
NWCONFIG.NLM
You entered an invalid Novell eDirectory object name.
Enter a valid object name.
NWCONFIG.NLM
You attempted to assign an object name that already has been assigned to a
Novell eDirectory object.
Choose a new object name.
NWCONFIG.NLM
The command line exceeded NWCONFIG's internal buffer length for
command lines.
Switch to the system console and load the driver manually, supplying the
necessary parameters.
NWCONFIG.NLM
Proceed as appropriate for your situation.
NWCONFIG.NLM
Upgrade the bindery before trying to install the volumes in Novell eDirectory.
NWCONFIG Messages 405