Novell NETWARE 6-DOCUMENTATION Manual page 3123

FLAG-x-819: You cannot assign a user and group at the same time.
Source:
Possible Cause:
Action:
FLAG-x-825: The Copy Inhibit attribute is not supported in v2.x
Source:
Possible Cause:
Action:
FLAG-x-850: The Delete Inhibit attribute is not supported in v2.x
Source:
Possible Cause:
Action:
FLAG-x-875: The Rename Inhibit attribute is not supported in v2.x
Source:
Possible Cause:
Action:
FLAG-x-876: The Migrate attribute is supported only with NetWare v4.x
Source:
Possible Cause:
Action:
172 System Messages
FLAG.EXE
Users and groups must be assigned in separate commands. The user tried to
assign them at the same time.
Try again, assigning users and groups separately.
FLAG.EXE
The user tried to use the Copy Inhibit file attribute to flag a file located on a
NetWare 2 server. This attribute only works on files located on NetWare 3 and
NetWare 4 servers.
If the files are on a NetWare 2 server, do not use Copy Inhibit file attribute to
flag the files.
FLAG.EXE
The user tried to use the Delete Inhibit file attribute to flag a file located on a
NetWare 2 server. This attribute only works on files located on NetWare 3 and
NetWare 4 servers.
If the files are located on NetWare 2 servers, do not use the Delete Inhibit file
attribute to flag the files.
FLAG.EXE
The user tried to use the Rename Inhibit file attribute to flag a file located on
a NetWare 2 server. This attribute only works on files located on NetWare 3
and NetWare 4 servers.
If the files are located on NetWare 2 servers, do not use the Rename Inhibit
file attribute to flag the files.
FLAG.EXE
The user tried to set the Migrate attribute on a server that is not a NetWare 4
server. This attribute is supported only on NetWare 4 servers.
Use the Migrate attribute only on a NetWare 4 server.