Novell NETWARE 6-DOCUMENTATION Manual page 3347

NWCONFIG-X-283: The command line string for driver name was too long and could
not be generated.
Source:
Explanation:
Action:
NWCONFIG-X-284: A value must be entered for parameter name. Enter a value before
you load the driver.
Source:
Explanation:
Action:
NWCONFIG-X-285: Value value cannot be interpreted.
Source:
Explanation:
Action:
NWCONFIG-X-286: Value value is already in use. Choose another one.
Source:
Explanation:
Action:
NWCONFIG-X-287: Recoverable parameter dependency errors occurred with
parameter value. You may continue anyway.
Source:
Explanation:
Action:
396 System Messages
NWCONFIG.NLM
NWCONFIG has a limited buffer for generating a command line to use when
loading driver files. The parameters you desire require a command line longer
than NWCONFIG can generate.
Load the driver from the system console, providing the parameters by hand.
NWCONFIG.NLM
The specified parameter requires a value as in the example below:
NET=01240000
Specify the proper value for the parameter.
NWCONFIG.NLM
The specified value has no meaning to NWCONFIG.
Supply a valid value as indicated in the documentation for the indicated
product.
NWCONFIG.NLM
The value specified is already in use.
Choose another value (for example, a different interrupt number).
NWCONFIG.NLM
The value you supplied for a parameter required another parameter that was
not supplied.
None. This message is for information only. NWCONFIG was able to recover
from the error.