Novell NETWARE 6-DOCUMENTATION Manual page 3104

FILESYS-X-745: Attempt to allocate memory to read volume definition tables failed.
Source:
Possible Cause:
Action:
FILESYS-X-746: Volume name could NOT be mounted. Some or all volume segments
cannot be located
Source:
Possible Cause:
Action:
FILESYS-X-748: Attempt to allocate memory to hold NetWare partition information
failed.
Source:
Possible Cause:
Action:
FILESYS-X-759: Unable to read volume definition table from NetWare partition on
drive.
Source:
Possible Cause:
Action:
FILESYS.NLM
The server does not have enough memory to mount the volume.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
FILESYS.NLM
The volume specified in the MOUNT command could not be mounted. The
volume has segments on more than one hard disk, and at least one of the hard
disks is not responding.
Make sure all disk drivers have been loaded. See
Operating System Administration
FILESYS.NLM
The server does not have enough memory to hold partition information.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
FILESYS.NLM
The volume definition table on the specified drive could not be read because
of a disk error. Consequently, the volume could not be mounted.
Check the disk drive and the cable. See
System Administration
Guide.
Disk Errors
Guide.
FILESYS - File System Messages 153
Freeing Server Memory
Guide.
Disk Errors in the Server
Freeing Server Memory
Guide.
in the Server Operating