Novell NETWARE 6-DOCUMENTATION Manual page 3487

Action:
SERVER-X-113: Error reading MT unsafe API list in NLM's XDC data.
Source:
Explanation:
Action:
SERVER-X-135: API name is not accessible from address space name.
Source:
Possible Cause:
Action:
SERVER-X-137: API name is not accessible from address space name.
Source:
Action:
SERVER-X-196: name file exists, overriding default locale values.
Source:
Explanation:
Action:
SERVER-X-197: name file exists but is invalid. NOT overriding default values.
Source:
Explanation:
Possible Cause:
Action:
536 System Messages
Check disks to make sure they are functioning correctly. If the disk system is
functioning, then contact the NLM vendor.
SERVER.EXE
There was an error reading part of an NLM. The NLM might be corrupted or
there might be a disk problem.
Check disks to make sure they are functioning correctly. If the disk system is
functioning, then contact the NLM vendor.
SERVER.EXE
An NLM loaded into a protected address space is not designed to run in
protected memory.
Run the NLM in the kernel address space.
SERVER.EXE
See message "SERVER-X-135: API name is not accessible from address
space name." on page 536
SERVER.EXE
The language specified by the file will be used instead of the default language.
This message is for information only. No action is necessary.
SERVER.EXE
Each language supported by NetWare has a language configuration file that is
loaded into the operating system tables. In this case, the language specified by
the file will NOT be used instead of the default language.
The language configuration file is corrupted.
Delete the corrupted file and copy the original file from the master CD-ROM
or diskette.