Novell NETWARE 6-DOCUMENTATION Manual page 3198

LOGIN-X-918: This utility was unable to get connection information. Error code:
code.
Source:
Action:
LOGIN-X-919: This utility could not create a connection list. Error code.
Source:
Action:
LOGIN-X-920: This utility does not have enough memory.
Source:
Explanation:
Action:
LOGIN-X-921: Either the supervisor has locked the bindery or volume SYS: is not
mounted.
Source:
Action:
LOGIN-X-922: Intruder detection lockout has disabled this account.
Source:
Action:
LOGIN.EXE
See message "918: This utility was unable to get connection information.
Error code: code." on page 779
LOGIN.EXE
See message "919: This utility could not create a connection list. Error code."
on page 779
LOGIN.EXE
LOGIN does not have enough workstation conventional memory to execute.
Free conventional memory by unloading device drivers or other TSA
programs. See message
of memory." on page 779
For additional help, see message
memory to load the Unicode table files." on page 781
LOGIN.EXE
See message "921: Either the supervisor has locked the bindery or volume
SYS: is not mounted." on page 779
LOGIN.EXE
See message "922: Intruder detection lockout has disabled this account." on
page 780
"920: This utility was unable to allocate number bytes
"971: The workstation does not have enough
LOGIN Messages 247