Novell NETWARE 6-DOCUMENTATION Manual page 3082

FILESYS-X-497: The FAT chain used to define the FAT overlaps on itself. Volume name
was NOT mounted.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-498: Error reading in the FAT. Volume name was NOT mounted.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-499: The mirror copies of the FAT don't match. Volume name was NOT
mounted.
Source:
Explanation:
Possible Cause:
Action:
FILESYS.NLM
A File Allocation Table (FAT) chain is a list of directory block locations.
This error probably indicates file system corruption.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
A File Allocation Table (FAT) is an index to one or more disk allocation
blocks in which a file is located.
This error probably indicates file system corruption.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
A File Allocation Table (FAT) is an index to one or more disk allocation
blocks in which a file is located.
This error probably indicates file system corruption.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS - File System Messages 131