Novell NETWARE 6-DOCUMENTATION Manual page 3035

Action:
Action:
DSREPAIR-x-024: Could not update whole value for file: filename, offset offset
Source:
Explanation:
Possible Cause:
Possible Cause:
Action:
Action:
Action:
DSREPAIR-x-025: Could not read whole value for file: filename, offset offset
Source:
Explanation:
Action:
Action:
Action:
DSREPAIR-x-026: Could not purge record in file filename, offset offset
Source:
Explanation:
Possible Cause:
Action:
84
System Messages
If these actions do not work, reboot the server and try again.
A final option is to reinstall the server. If the problem persists, contact a Novell
support provider.
DSREPAIR.NLM
DSREPAIR could not write a record to the eDirectory database.
The volume might be full
The database might be corrupted.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume then running DSREPAIR again. Then try
unloading and reloading eDirectory.
If these actions do not work, reboot the server and try again.
A final option is to reinstall the server. If the problem persists, contact a Novell
support provider.
DSREPAIR.NLM
DSREPAIR could not read a record from the eDirectory database.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume then running DSREPAIR again. Then try
unloading and reloading eDirectory.
If these actions do not work, reboot the server and try again.
A final option is to reinstall the server. If the problem persists, contact a Novell
support provider.
DSREPAIR.NLM
DSREPAIR could not purge a record from the eDirectory database.
The database could be corrupted.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume and running DSREPAIR again. Then try
unloading and reloading eDirectory.