Novell NETWARE 6-DOCUMENTATION Manual page 3378

NWCONFIG-X-482: This server is a single reference time source. If there is another
directory-enabled server in this eDirectory tree, before you continue to remove
eDirectory you should:
1) Press Alt+Esc and enter Set Timesync Type = Secondary at the console prompt.
2) Go to another directory-enabled server in this eDirectory tree, a server that has the
time set correctly, and enter Set Timesync Type = Single at the console prompt.
After eDirectory has been removed, update the AUTOEXEC.NCF files on both servers
by changing the line set Default Time Server Type = from Single to Secondary in the
one case and from Secondary to Single in the other case.
If a TIMESYNC.NLM configuration file (TIMESYNC.CFG) exists on either or both
servers, be sure to update it also (via MONITOR.NLM). These steps are necessary to
ensure that if the server is taken down and restarted, the time server type will be
correct.
Source:
Explanation:
Action:
NWCONFIG-X-483: The ISSLIB.NLM just loaded will not work with the CLIB.NLM
currently loaded. For ISSLIB.NLM to work, a version of the CLIB.NLM either having
revision number 4.01e or later is required. Unload the currently loaded CLIB.NLM and
reload the correct version of CLIB.NLM.
Source:
Explanation:
Action:
NWCONFIG.NLM
In the single reference time synchronization method, there must be ONE
single reference time server on the network at all times. If the server that
Novell eDirectory is being removed from is that single reference server, that
role should be assigned to a different server BEFORE removing Novell
eDirectory.
Follow the steps in the message.
NWCONFIG.NLM
ISSLIB only works with the more current versions of CLIB.
Follow the suggestions in the message.
NWCONFIG Messages 427