Novell NETWARE 6-DOCUMENTATION Manual page 3353

NWCONFIG-X-319: NWCONFIG cannot get the root directory entry for volume name.
Source:
Explanation:
Action:
NWCONFIG-X-320: The bindery upgrade failed. Some of the bindery objects will have
to be created and/or trustee rights changed manually later using Novell eDirectory
workstation utilities.
Source:
Explanation:
Action:
NWCONFIG-X-321: The Directory ID cannot be stamped on volume name.
Source:
Explanation:
Action:
NWCONFIG-X-322: Driver name on line number of the AUTOEXEC.NCF file has no
`FRAME=<frame name>' parameter. All new Ethernet drivers that have no frame type
specified will now default to Ethernet 802.2 frame type, whereas they previously used
802.3. Write down the line number. You will be shown the AUTOEXEC.NCF file after
NWCONFIG is finished checking it, and you may then add a frame parameter for this
driver if it is an Ethernet driver.
Source:
Explanation:
Action:
402 System Messages
NWCONFIG.NLM
The root directory (/) was not readable.
See Resolving Volume I/O Errors
Administration Guide.
NWCONFIG.NLM
NWCONFIG was unable to convert all of the bindery objects to Novell
eDirectory objects.
You will have to manually create any missing objects after the installation is
complete.
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
This error can occur only when a manual installation is being attempted from
the command line. Both frame types are loaded automatically when loading a
driver with the NWCONFIG program.
Proceed as appropriate for your situation.
in the Traditional File Services